The extruder HeatCore DDG provides great traction that reduces jams and allows printing on ABS, PLA, wood, bronze and flexible filaments.
The Kapton tape is a high heat resistant and electrically insulating tape. Length: 50 meters Width: 5mm or 10mm (choose)
200x300 mm MK3 heatbed made of aluminum with 100K thermistor. You will can print directly without any type of surface (like glass) or print use our antiwarping surface PEI. Size: 300x200 mm ( 314 mm x 214 mm ) Thickness: 3mm 12V or 24V Fully compatible with Prusa Steel V4 Screw position ( 308 mm x 208 mm)
Based on Popular in RepRap community ATC Semitec 104GT-2. M3x0.5 threaded. Compatible with E3D V6, Unibody o DDG heater block. Reprap wiki for more details on thermistors. Thermistor temperature value table for firmware, if you need one. Connector type: JST 2 pin connector, 2.5mm spacing. M3 Stud threaded length: 3mm
The heated bed PCB is made of thicker 2mm FR4 laminate. Product can be used to upgrade your existing Prusa i3 3D printer to a larger 300 x 200 mm print area. Compatible with our Prusa Steel XL.
New MK2 extruder for Prusa Steel. Available with hotend v6 all metal (compatible), Genuine E3D Lite 6 o Genuine E3D V6 All-Metal HotEnd.
The Mk42 Heatbed is the ultimate 3D printer heated bed by Josef Prusa. The heatbed include 9 calibration points. The bed is totally flat. LED heating indicator included Worldwide shipping. Fully compatible XYZ autoleveling Techincal specifications: Power 140W Voltage 12V 3.2mm thickness 250 x 210 mm print area Fully compatible with...
Kit Nema 17 with integrated ACME 300mm leadscrew with POM nut. The kit include: 2x Nema 17 motors with integrated leadscrew tr*8 320 mm 3x Nema 17 motors
The PINDA sensor has been designed to operate at 5V input voltages. You can connect directly in the most 3D printer boards like Ramps 1.4, UltiMachine RAMBo, Mini RAMBo.
Antiwarping Ultem PEI sheet print surface for heatbed. Include 3M 468MP adhesive backing ready for application. Fully compatible with MK42 heatbed. 175 um thickness 242 x 260 mm 3M 468MP adhesive
All-in-one board. Control easy your 3D printer. This board has an Arduino Mega, a RAMPS y the 1/32th DRV8825 drivers in the same board. 100% Fully compatible with Marlin Compatible with 3d printers like Prusa i3,P3Steel, Anet A8 and other DIY models.
Magnetic heatbed MK52 12V or 24V. Fully compatible with our Prusa steel frame, original Prusa i3 MK2 MK2S MK2.5 and Prusa MK3 Thermistor, nuts, bolts and spacers are included.
Original Prusa motor Nema 17 40mm with integrated leadscrews 320 mm. Low friction POM nut.
Original Prusa motor Nema 17 40mm with integrated leadscrews 420 mm. Low friction POM nut.
Kit Nema 17 Original Prusa with integrated ACME 300mm leadscrew with POM nut. The kit include: 2x Nema 17 motors with integrated leadscrew tr*8 420 mm 3x Nema 17 motors
The original PINDA 2 is proximity sensor and has been designed to operate at 5V input voltages. A thermitor is embedded inside the new P.I.N.D.A. 2 probe to compensate for temperature drift. So the first layer will always be spot on. You can connect directly in the most 3D printer boards like Ramps 1.4, UltiMachine RAMBo, Mini RAMBo, Einsy.
The market-leading Hot End: all-metal design, British engineering, high-temperature performance. The best hotend for your 3D printer.
Silent drivers with the Trinamic TMC2130 chip. Version with SPI Homing without endstops Detect skipped steps and layer shifting 1/16 (8bits boards )or 1/256 (32bits boards) 1 driver included + 1 heatsink
Brushless 40x40 fan
The 1.75mm Universal v6 HeatSink has been designed to utilise our unique embeded bowden couplings which makes the bowden so compact that we merged bowden and direct into the same product. The product is significantly less bulky than its v5 predecessor. This product comes complete with the embedded bowden coupler installed in the heatsink.
Heater Cartridge - 12v 40w
Heater Cartridge - 12v 40w
Original motor kit for MMU2. Same day dispatch.